42" Grab Bars | Bobrick B-6806 Series

✅ 42" (1067 mm) length with 1-1/2" (38 mm) diameter tubing

✅ Constructed of 18-gauge (1.2 mm) Type 304 stainless steel with satin finish

✅ Concealed mounting flange made from 1/8" (3 mm) thick Type 304 stainless steel

✅ Flange size: 2" W × 3-1/8" H (50 × 80 mm) with screw holes for concealed anchors

✅ Snap-on flange cover made of 22-gauge (0.8 mm) stainless steel

✅ 3-1/4" (85 mm) diameter cover fully conceals mounting hardware

✅ 900 lb (408 kg) load rating — exceeds ADA structural requirements

✅ ADA compliant — meets §609.2 graspability and §609.3 wall clearance

✅ Made in USA

Why Choose the B-6806x42?

ADA Standards §604.5.1 require a minimum 42" side-wall grab bar in every accessible toilet stall — making the B-6806x42 one of the two essential grab bars for any ADA-compliant restroom (alongside the 36" rear-wall bar). The Bobrick B-6806x42 is the 42-inch variant of Bobrick's most widely specified concealed-mount grab bar series, and the exact minimum length required for the side wall of a standard accessible toilet stall. Per §604.5.1, it must be mounted 12" maximum from the rear wall and extending 54" minimum from the rear wall, between 33"–36" above the finished floor. The satin finish on 18-gauge Type 304 stainless steel holds up to daily commercial disinfection without corroding. As a Bobrick Premier Partner, TotalRestroom.com carries the full B-6806 line with a Low Price Guarantee and 48-Hour QuickShip on stocked sizes.

Key Features & Applications

• 900-lb Load Rating with Concealed Mounting: Exceeds ADA structural stress requirements, supporting up to 900 lbs (408 kg) of downward load when anchored into proper structural backing. Snap-on flange covers fully conceal mounting hardware for a clean, professional appearance with no exposed fasteners.

• Type 304 Satin Stainless — Built for Commercial Cleaning: The satin finish on 18-gauge Type 304 stainless steel resists corrosion, hides fingerprints, and cleans easily with commercial-grade disinfectants, bleach solutions, and hospital-grade cleaners. Standard specification for healthcare, hospitality, and institutional restrooms.

• The Required ADA Toilet Side-Wall Bar: At 42" (1067 mm), this is the minimum required length for the side wall of every ADA-accessible toilet stall per §604.5.1. It must be installed 12" maximum from the rear wall and extending 54" minimum from the rear wall, between 33"–36" above the finished floor. Paired with a 36" rear-wall bar, these two bars satisfy the complete grab bar requirement for a standard ADA toilet stall.

• USA Manufacturing and Long-Term Parts Availability: Bobrick manufactures the B-6806 series domestically, ensuring consistent quality and reliable lead times. Replacement flanges and mounting hardware are stocked separately — built to be serviceable for the life of the facility.

Satin vs. Peened — Which Finish Do You Need?

The B-6806x42 (satin) is the standard choice for commercial restrooms, offices, healthcare facilities, and any application where appearance is a priority. The smooth satin surface cleans easily and matches virtually any restroom hardware finish.

The B-6806.99x42 (peened) has a textured surface for improved wet-hand grip — preferred for showers, pool facilities, locker rooms, and anywhere users regularly have wet or soapy hands. Both versions are identical in diameter, gauge, load rating, and mounting system.

Frequently Asked Questions

• Does this grab bar come with mounting hardware? No — mounting hardware is not included because wall construction varies widely (concrete block, steel stud, wood framing, tile backer). We recommend #14 sheet metal screws or 1/4" wood screws into structural backing rated for 250 lbs minimum — never into drywall alone.

• Is a 42" grab bar required for ADA? Yes — ADA §604.5.1 requires the side-wall grab bar in every accessible toilet stall to be at least 42" long, positioned 12" maximum from the rear wall and extending 54" minimum from the rear wall, between 33"–36" above the finished floor. The B-6806x42 satisfies this requirement exactly. Pair it with a 36" rear bar to complete the accessible stall — see our Bobrick ADA Grab Bar Kit.

• Is the B-6806x42 ADA compliant? Yes. The 1-1/2" diameter meets ADA §609.2 graspability requirements, and the 1-1/2" wall clearance meets §609.3. Installed per §604.5.1 at 33"–36" AFF, 12" maximum from the rear wall and extending 54" minimum from the rear wall, this bar fully satisfies ADA Standards for Accessible Design.

• What is the difference between 1-1/4" and 1-1/2" diameter? The B-6806 at 1-1/2" diameter is the heavy-duty commercial standard, preferred for healthcare, high-traffic facilities, and projects requiring maximum grip surface. The B-5806 at 1-1/4" is used in lower-traffic commercial or light institutional settings. Both meet ADA graspability requirements.

• Can this bar be mounted horizontally, vertically, or at an angle? Yes — the B-6806 can be installed in any orientation. For the ADA side-wall toilet position, §604.5.1 specifies horizontal mounting between 33"–36" AFF. Verify the required orientation with your applicable building code before installation.

42" (1067 mm) straight grab bar with a 1-1/2" (38 mm) diameter, constructed from heavy-duty 18-gauge (1.2 mm) Type 304 satin-finish stainless steel. The minimum required length for ADA accessible toilet stall side walls per §604.5.1. Features concealed mounting flanges with snap-on covers for a clean, professional appearance. View the full Bobrick B-6806 series for all available lengths and finishes.