Kegland Series X.1 Kegerator Grande with two Stainless Steel Nukataps

Grande signifies complete bundle. We supply the Kegerator equipment, you supply the beverage.

This new Series X.1 Kegerator has several major advancements over the older Series 4 model.

• 10% more power efficient
• 15% faster cooling and better cooling in hotter climates
• Thicker walls for improved insulation
• Fits up to 4 x 19 Litre Corney Kegs

The Kegland Series X.1 Kegerator Grande includes

• Keg Master Series X.1 Kegerator Fridge with Font Fan Switch
• Honey Comb Reinforced Black Plastic Wrap Round Drip Tray
• Reinforced four point anchored castor wheels with bolts. (2 Locking, 2 Non-Lockable)
• Co2 Cylinder Holder (designed to suit 2.6 kg gas cylinder)
• Stainless Steel Guard Rail
• Font Plug

Kegerator equipment includes

• 1 x Double Tap Brushed Stainless Steel Font
• 2 x Stainless Steel Short Shank
• 2 x Stainless Steel Nukataps
• 2 x Stainless Steel Self Closing Springs
• 2 x Black Plastic Tap Handle
• 6 x Meters of 4 mm ID x 8 mm OD Beer Line
• 2  x Meters of 5 mm ID x 8 mm OD Gas Line
• 1 x Duotight Push in Tee Pieces.
• 4 x Metric M5 stainless screws to secure the font to the fridge.
• 2 x Duotight Beer Disconnects.
• 1 x 2.6kg Co2 Full Gas Bottle
• 1 x Gas Regulator
• 2 x Duotight Gas Disconnects.
• 2 x 19 litre Oxybar 19 litre PET Kegs.
• 250gm Keg and Line Cleaner

External Dimensions

• 600 mm Wide
• 665 mm Deep
• 840 mm Height
• 890 mm Height of the fridge including castor wheels but excluding the height of guard rail, drip tray or font)
• 240 volt - 85 watts

Internal Dimensions

• Depth - 425mm
• Height - 725mm
• Width - 550mm

• When it comes to maintaining the best quality beer for your customers, the routine cleaning of your draft lines is an essential practice. Over time, a buildup of bacteria, mould, yeast and sediment (beer stone) can accumulate in your lines, affecting your beer’s flavour profile and causing foaming.

• Remove your draft line from the keg and make sure any beer remaining in the line is removed
• Mix a cleaning solution of P.B.W using 1 to 2 ounces per gallon of hot water to put through the draft line under pressure. You can use a line cleaning kit available at any homebrew store listed here
• Run the solution through your draft line, letting it soak for up to 30 min. to remove any buildup
• Run clean water through the draft line, under pressure, to flush out the cleaner
• Tap the next keg and let beer run through the line, checking for any issues.